PES Electro-Flex Penile Ring - For Fetish And BDSM Electro Sex Pleasure
Every sexy toy box should have at least one of these flexible PES Electro-Flex Penile Rings! This sype of electro sex Electrode is a basic necessity that can be used in almost any configuration!
Created as an alternative to acrylic penile rings, the PES Electro-Flex Penile Rings conform to the penile shaft or scrotum with a fit so comfortable you'll forget you're wearing them vs. the older acrylic that were rigid and non-conforming to the penile shaft or scrotum, as well as being susceptible to breakage and prone to causing hot spots.
The PES Electro-Flex Penile Ring may be the most comfortable sexual treat in our extensive line of electrodes. These conductive rings surround the penile shaft or scrotum with a fit so comfortable you may forget you're wearing it. Made of a specially formulated conductive silicone elastomer.
The PES Electro-Flex Penile Ring is so pliable that it can conform to a multitude of shapes. The flexibility permits more conductive area to make contact with the penile shaft or scrotum, increasing the focusing capabilities of the Erotic Electro Stimulation, unlike its older acrylic counterpart, which was non-conforming to the penile shaft or scrotum, rigid, and susceptible to breakage. When worn over long periods of time, the acrylic penile ring became very uncomfortable to the user.
PES Electro-Flex Penile Rings come in three widths and three inner diameters, and you can choose from double or single pole design. The Double Electro-Flex Ring has two separate electro conductive pads lining the entire inner circumference of the ring. The Single Electro-Flex Ring has one conductive pad lining the entire inner circumference of the ring. Each Electro-Flex Penile Ring has a positioning handle integrated into it, facilitating the focusing of Erotic Electro Stimulation.
The single conductive Electro-Flex Penile Ring requires another single conductive electrode, such as the single conductive Electro-Flex Anal Plug, to complete the circuit.
Note: A single or double conductive electrode may also be referred to as a "single or double pole" electrode.
PES' dynamic engineering gives you great creative license to explore your own personal configurations of electrodes.
IMPORTANT: To find your proper PES Electro-Flex Penile Ring fit, measure the circumference of the penile shaft while erect where you wish the ring to fit (the base of the shaft in front of the scrotum is recommended but some wish to experiment with a variety of locations for a difference in sensation). To find your inner diameter, divide the circumference of the shaft by 3.14. Please review the sizing chart to find the ring that will best fit you. They are available in three inner diameters: 1 ¼”, 1 ½”, and 1 5/8” (32mm, 38mm or 41mm).
C073 1 1/4" x 5/8"
C193 1 1/4" x 1"
C074 1 1/2" x 5/8"
C197 1 1/2" x 1"
C199 1 1/2" x 1 1/2"
C088 1 5/8" x 5/8"
C203 1 5/8" x 1"
C205 1 5/8" x 1 1/2"
C075 1 1/4" x 5/8"
C194 1 1/4" x 1"
C090 1 1/2" x 5/8"
C198 1 1/2" x 1"
C200 1 1/2" x 1 1/2"
C089 1 5/8" x 5/8"
C204 1 5/8" x 1"
C206 1 5/8" x 1 1/2"
SAFETY NOTE: Make sure to cover the loose lead end with tape so it does not accidentally come into contact with your flesh.
SIZING: Since proper fit makes a significant difference in how PES Electro Stimulation products affect the user, we suggest that you choose your size carefully. Penile Electrodes should be snug but never too tight. Keep in mind that the erection will fluctuate during the course of your stimming session.
PES Electro-Flex Penile Rings come in a variety of sizes ranging from 1¼” or 32mm to 1-5/8” or 41mm. in diameter. That's 1¼” to 1-5/8” in diameter.
To find your proper fit, measure the circumference of the penile shaft while erect where you want the ring to fit (the base of the shaft is recommended but some wish to experiment with a variety of locations for a difference in sensation). To find your inner diameter, then divide the circumference of the shaft by 3.14. Please review the sizing chart to find the ring which will best fit you.
Ready for use with The PES Powerbox
Requires PES Low Profile Leads for use with ErosTek Power Units (US unit, European unit, or Remote unit) and Folsom power units Dual Output PSG or Dual Output PSG-MAX
Not recommended for use with The Rimba Powerbox(s)
IMPORTANT NOTE: Half of these items are single-electrode devices (monopolar). Another single-electrode device (or dual-electrode type with "Y" adapter) is required for their use.
Half of these items are UNI-POLAR/ Half are BI-POLAR.
Bi-Polar: Also known as a dual electrode device. A dual-electrode device has a "Y" adapter. A bi-polar device can be used alone, or with another attachment. The bi-polar design is easy to use with or without other accessories. Bi-polar refers to an electrical play electrode or attachment that utilizes some type of a spring clip that has a contact on each of its jaws. Each contact point is then hooked up to a generator (electrical stimulation unit, such as a power box).
Uni-Polar / or Mono-Polar: Also known as a single electrode device. When you use a uni-polar/ or mono-polar device, another single-electrode device (or dual-electrode type with "Y" adapter) is required for use. Uni-polar/ or mono-polar refers to an electrical play electrode or attachment that utilizes some type of spring clip with one or two contacts (which may or may not be on each of its jaws). If there are two contacts, each is connected so both match the generator, (electrical stimulation unit such as a power box) they're connected to.